Sony VSP-BZ10 Manuel D'installation page 20

Precautions
• The specifications of this player are
subject to change for improvements
without notice.
• For safety, connect the port of this player
only to a network where there is no danger
of excessive voltage or voltage surges.
• This player supports only SDHC Memory
Cards that are formatted with FAT32 file
systems.
• When the ACCESS indicator is lit or
flashing green, the player is reading or
writing data. Ejecting a USB flash drive
while it is being accessed may result in
damage to data or damage to the USB
flash drive.
• When you remove or insert an SDHC
Memory Card, make sure that the power
cord is disconnected.
Notes on data stored to memory
• In addition to various function settings, IP
and e-mail addresses are stored on the
player's memory. Erasing the data stored
on the player's memory is strongly
recommended when disposing of or
transferring ownership of the VSP-BZ10.
For details on how to erase the data, refer
to "Returning to Default Settings" in the
"Using the Signage Web Manager"
section in the Operating Instructions (on
the supplied CD-ROM (Software &
Manuals for Digital Signage Player) in
PDF format).
• Be aware that Sony shall not be liable or
provide compensation for any loss or
damage of data stored on the player's
memory due to defects, as a result of
repair, or any other reason. Also be aware
that Sony cannot restore any lost or
damaged data.
• The SD logo is a trademark.
• The SDHC logo is a trademark.
• All other product names, company names, etc. mentioned in this manual are trademarks or
registered trademarks of their respective owners.
20
Precautions
Note on external storage media
Be aware that Sony bears no responsibility
for the inability to store data on an external
storage medium or for the loss or damage of
any stored data, for any reason, and shall not
be liable or provide compensation for any
damage to data incidental or otherwise.