Information Codes - Samsung NX58H9950W Série Manuel Utilisateur

Problem
Display goes blank.
Food does not bake or
roast properly in the
oven.
Food does not broil
properly in the oven.

Information codes

Code symbol
Shorted Key.
Oven sensor opened problem.
Oven sensor shorted problem.
Oven overheating.
Door locking error.
Possible cause
The electrical outlet Ground Fault
Interrupter (GFI or GFCI) has been
tripped and needs to be reset.
Your digital control has been
damaged.
Wrong cooking mode is selected.
The oven racks have not been
positioned properly for the foods
being cooked.
Incorrect cookware or cookware
of improper size being used.
Oven thermostat needs
adjustment.
There is aluminum foil on racks
and/or oven bottom.
Clock or timers not set correctly.
Oven controls not set properly.
Oven door was not closed during
broiling.
The rack has not been properly
positioned.
Meaning
English - 67
Replace fuse or reset circuit
breaker.
See page 27.
See page 34.
See page 21.
See page 45.
Remove foil.
See pages 18 and 19.
See page 29.
See page 27.
See broiling guide on page 34.
Solution
Press the OFF/CLEAR button and restart
the oven. If the problem persists, disconnect
all power to the oven range for at least 30
seconds and then reconnect the power.
If this does not solve the problem, contact a
local Samsung service center.
Action