Body Analysis - ADE Tamina Mode D'emploi

2. Use the or button to select the desired memory cell, e.g. "P01".
3. Press SET.
or flashes on the display.
4. Using the or the
5. Press SET.
The preset value for that age blinks on the display.
6. Using the or the
7. Press SET.
The preset value for body height flashes on the display.
8. Using the or the
9. Finally, press SET. You have thus input the necessary data.
The display shows "0.0", the unit of measurement and the gender.
You can now:
– Proceed as described above and enter the data of another person.
– Stand on the scale and have your body analysis carried out.
– Wait until the scale turns off automatically after a few seconds.
‚ If you hold down the
flow of the displayed data will occur more quickly.
‚ Entered data can only be overwritten by making a new entry.

Body analysis

‚ Body analysis is only possible if your data has been entered (see
previous chapter).
‚ See the chapter "Weighing Tips".
1. Press SET.
2. Use the or button to select the memory cell where you have saved your
personal body data, e.g. "P01".
Shortly thereafter the display shows "0.0", the selected unit of measurement and the
gender.
3. Position yourself barefoot on the scales. Stand still and do not hold on to anything.
– In doing so, ensure each foot is placed on a sensor.
– There must be no contact between your feet, your legs, your calves, or your
thighs. Otherwise, the measurement will be imprecise.
Shortly afterwards, the measured weight is displayed flashing. Remain standing still.
Your measured values will then be shown to you repeatedly on the display:
BA 2003 body analysis scale
button, choose your sex: for male, or for female.
button, enter your age.
button, enter your height.
or the button, the forward and backward
Body analysis
23