walser 16773 Mode D'emploi page 21

1. Plug the 12V plug
2. Now select the desired heating level, by setting the slide switch
to „LOW" (35-45°C) or „HIGH" (40-50°C). The power LED will light up.
3. Turn off the heated seat pad by setting the slide switch to „OFF".
4. Then unplug the 12V plug from the 12V vehicle power socket.
5. Cleaning
Water penetrating into the housing can cause a short circuit.
- Never immerse the heated seat pad in water.
- Ensure that water does not get into the heated seat pad.
Improper handling of the heated seat pad can cause damage.
- Do not use abrasive cleaners, brushes with metal or nylon bristles and
sharp or metallic cleaning objects such as knives, scrapers and the like.
This will damage the surface.
- Never put the heated seat pad in the washing machine.
1. Before cleaning unplug the 12V plug from the 12V vehicle power socket.
2. Let the heated seat pad cool completely.
3. Wipe the heated seat pad off with a slightly damp cloth.
4. Allow all parts to dry completely afterwards.
6. Maintenance
There is a fuse in the 12V plug to protect the electrical system of the vehicle.
Check and replace the fuse when the heated seat pad no longer works (see
Fig. E).
1. Unscrew the screw cap
2. Remove the plug tip
3. Remove the fuse
into the 12V vehicle power socket.
7
Risk of short circuit!
Risk of damage!
counter clockwise from the 12V plug
11
.
10
.
9
either
2
.
7
21