Standard Accessories; Optional Accessories - Hitachi H 45MA Mode D'emploi

ACCESSORIES
WARNING:

STANDARD ACCESSORIES

(1) Bull Point (SDS max shank) (Code No. 313471) ................................................................ 1
(2) Case (Code No. 314875) ...................................................................................................... 1
(3) Side Handle (Code No. 981870) .......................................................................................... 1
(4) Allen Wrench (for 6 mm screw) (Code No. 944459) ......................................................... 1
(5) Allen Wrench (for 5 mm screw) (Code No. 944458) ......................................................... 1

OPTIONAL ACCESSORIES

Crushing
(1) Bull Point (SDS max shank type)
Groove digging and edging
(1) Cold chisel (SDS max shank type)
Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
....... sold separately
Overall Length
Code No.
Overall Length
Code No.
11-1/32" (280 mm) 15-3/4" (400 mm)
313471
11-1/32" (280 mm) 15-3/4" (400 mm)
313473
English
313472
313474
11