Appliance Description; Switch Positions; Operation And Use - Beem Pasta-FiXX Mode D'emploi

Pasta-FiXX

Appliance description

(See illustration on the left fold-out page)
1 Motor unit
2 Spindle socket
3 Lid recess
4 Kneading switch position
5 Extrude switch position
6 Switch A
7 Switch B
8 Screw cap
9 Extruder screw
10 Centring ring
11 Drive spindle
12 Extruder screw housing
13 Kneading unit
14 Adapter ring
15 Pasta dough container
16 Lid
17 Macaroni attachment
18 Spaghetti attachment
19 Linguine attachment
20 Tagliatelle attachment
21 Small measuring cup
22 Large measuring cup
23 Conical filling shaft
24 Shortbread attachment
25 User manual (not illustrated)

Switch positions

Level Function
Appliance switched on:
Kneading mode
0
Appliance switched off.
Appliance switched on:
Dough extruding mode
20
Safety switches
The appliance is equipped with two safety
switches and can only be operated when
the pasta dough container (16) and the lid
(17) are correctly fitted on the motor unit.
WARNING
► Before using each time, check the
function of the safety switch. Switch
on the appliance without attached
container or lid for this purpose. If
the motor turns, the safety switch is
defective and the appliance may not
be used.

Operation and use

(See illustration on the right fold-out page)
Assembly (image A1)
Push the pasta dough container (15)
‹
onto the motor unit (1).
Push the centring ring (10) onto the
‹
drive spindle (11) (image A2) and
insert the extruder screw (9) into the
extruder screw housing (12).
Push the kneading unit (13) onto the
‹
drive spindle(11).
Push the adapter ring (14) onto the
‹
drive spindle (11) (image A3) so that
the adapter ring is flush with the
kneading unit (13).
Insert the drive spindle with all at-
‹
tached parts into the pasta dough
container (15) so that the end of the
drive spindle (11) fits into the spindle
socket (2) of the drive unit (1).
BEEM - Elements of Lifestyle
EN