Symbols Used; Intended Use; Limitation Of Liability; Declaration Of Conformity - Beem Pasta-FiXX Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Pasta-FiXX

Symbols used

DANGER
This indicates an imminent hazardous
situation, which could lead to severe
physical injury or death.
Follow these instructions listed here
to avoid danger.
WARNING
This indicates a possible hazardous
situation, which could lead to severe
physical injury or death.
Follow these instructions listed here
to avoid danger.
CAUTION
This indicates a potentially hazardous
situation, which could lead to minor
injuries or material damage.
Follow these instructions listed here
to avoid danger.
NOTE
A note contains additional informa-
tion to simplify the use of the appli-
ance.

Intended use

This appliance is intended primarily for
non-commercial use in closed rooms for
the production of pasta in normal house-
hold quantities. Any use other than previ-
ously stated is considered as improper
use.
16
WARNING
If not used for its intended purpose and/
or used in any other way, the appliance
may be or become a source of danger.
Use the only for its intended pur-
pose.
Observe the procedures described in
this user manual.
No claims of any kind will be accepted for
damage resulting from use of the for other
than its intended purpose.
The risk must be borne solely by the user.

Limitation of liability

We assume no reliability for damage or
follow-up damage in the case of:
failure to observe the instructions in
the user manual,
use for other than the intended pur-
pose,
improper or unsuitable handling,
incorrectly performed repairs,
unauthorised modifications,
use of non-approved parts or spare
parts,
use of unsuitable supplementary or ac-
cessory parts.

Declaration of Conformity

BEEM hereby declares that this appliance
complies with the fundamental require-
ments and other relevant provisions of
2006/95/EC, 2009/125/EC and
2004/108/EC directives.
BEEM - Elements of Lifestyle
EN

Publicité

Table des Matières
loading

Table des Matières