OPERATION WITH MENU SETTINGS
Press Menu button to navigate through the Menu settings. Voice Assisted Operation feature may
not be available on certain previous shipping models. At any time in Menu mode, short press PTT or
wait 3 seconds to exit the menu.
HOW TO...
Change Channel
Enter Monitor Mode
Enter Scan Mode
Send Call Tone (enabled
through CPS)
Quick Tip:
It is not necessary to wait for the voice prompt to be completed before continuing with next button
press.
Note:
For single channel models, Monitor, Scan Mode and Call Tone are supported. Single channel models
support Scan Mode when the user enables "Dynamic Talkaround Scan" on a repeater channel via the
customer programming software.
8
English
STEP 1
Press Menu button to navigate to
Channel.
Press Menu button to navigate to
Monitor.
Press Menu button to navigate to
Scan.
Press Menu button to navigate to
Call Tone.
STEP 2
Press +/- button to change
channel.
Press +/- button to activate
or deactivate Monitor.
Press +/- button to activate
or deactivate Scan.
Press +/- button to send
Call Tone.