Wiring Diagrams; Maintenance / Cleaning - Vortice CA V0 Notice D'emploi Et D'entretien

ENGLISH

Wiring diagrams

See Figure 17A.
Connection with the optional device upon request is foreseen to
check ventilation speeds (device not supplied in packaging):
- 17A) Vortice 3-speed selector Code 12.869.
IMPORTANT
Vortice guarantees correct product operation and control only
when paired with the Vortice 3-speed selector (Code 12.869).
Other types of connection
Alternatively, other connection diagrams are available, associated
to different control modes (devices provided by the installer).
Connection alternative for new installation
- 17B) Pairing with 3-switch control;
- 17C) Pairing with Electronic dimmer.
Machine replacement on existing system
Connection without modifications to the electrical system: the
same switches as on the existing system will be used.
CAUTION: it will not be possible to connect all 3 available
speeds but only those for which the electrical system is set up (to
be chosen by the installer):
- 17D) Speed connection: Minimum and Maximum;
- 17E) Speed connection: Medium and Maximum.
CAUTION
Correct operation of ERP 2018 is only guaranteed when set in
compliance with the connection diagram 17A).

Maintenance / Cleaning

Fig 18-20.
Important information
concerning the
environmentally compatible
disposal
IN CERTAIN EUROPEAN UNION COUNTRIES THIS
PRODUCT DOES
REQUIREMENTS OF THE NATIONAL LAWS
IMPLEMENTING DIRECTIVE WEEE, AND IN
THESE COUNTRIES THE PRODUCT IS NOT
SUBJECT TO SEPARATE DISPOSAL OPERATIONS
AT THE END OF ITS WORKING LIFE.
This product conforms to EU Directive EU
2012/19/EC.
This appliance bears the symbol of the
barred waste bin. This indicates that, at
the end of its useful life, it must not be
disposed of as domestic waste, but must
be taken to a collection centre for waste
electrical and electronic equipment, or
returned to a retailer on purchase of a
replacement.
It is the user's responsibility to dispose of this appliance through
the appropriate channels at the end of its useful life. Failure to do
so may incur the penalties established by laws governing waste
disposal.
Proper differential collection, and the subsequent recycling,
processing and environmentally compatible disposal of waste
equipment avoids unnecessary damage to the environment and
possible related health risks, and also promotes recycling of the
materials used in the appliance.
For further information on waste collection and disposal, contact
your local waste disposal service, or the shop from which you
purchased the appliance.
Manufacturers and importers fulfil their responsibilities for
recycling, processing and environmentally compatible disposal
either directly or by participating in collective systems.
NOT FALL WITHIN THE
11