Ce Declaration Of Conformity - Nice Hyke HK7024 Instructions Et Avertissements Pour L'installation Et L'utilisation

Declaration in accordance with the Directives: 2006/95/EC (LVD); 2004/108/CE (EMC); 2006/42/EC (MD) appendix II, part B
Note - The contents of this declaration correspond to declarations in the official document deposited at the registered offices of Nice S.p.a. and in particular to the last revision
available before printing this manual. The text herein has been re-edited for editorial purposes. A copy of the original declaration can be requested from Nice S.p.a. (TV) I.
Declaration number: 334/HYKE
Manufacturer's Name:
Address:
Person authorised to
draw up
technical documentation:
Type of product:
Model / Type:
Accessories:
The undersigned, Luigi Paro, in the role of Managing Director, declares under his sole responsibility, that the product specified above conforms to the pro-
visions of the following directives:
• Directive 2006/95/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 12 December 2006 regarding the approximation of member state legislation
related to electrical material destined for use within specific voltage limits, according to the following harmonised standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008; EN 60335-2-103:2003
• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 15 December 2004 regarding the approximation of member state legis-
lation related to electromagnetic compatibility, repealing directive 89/336/EEC, according to the following standards:
EN 61000-6-2:2005, EN 61000-6-3:2007
The product also complies with the following directives according to the requirements envisaged for "quasi machinery":
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND COUNCIL of 17 May 2006 related to machinery, and which amends the directive
95/16/EC (recast).
• It is hereby declared that the pertinent technical documentation has been compiled in compliance with appendix VII B of directive 2006/42/EC and
that the following essential requirements have been observed: 1.1.1- 1.1.2- 1.1.3- 1.1.5- 1.2.1-1.2.6- 1.3.1- 1.3.2- 1.3.3- 1.3.4- 1.3.7-1.3.9- 1.5.1-
1.5.2- 1.5.4- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11- 1.5.13-1.6.1- 1.6.2-1.6.4- 1.7.2- 1.7.3- 1.7.4- 1.7.4.1- 1.7.4.2- 1.7.4.3
• The manufacturer undertakes to transmit to the national authorities, in response to a motivated request, all information regarding the "quasi-machine",
while maintaining full rights to the related intellectual property.
• Should the "quasi machine" be put into service in a European country with an official language other than that used in this declaration, the importer is
obliged to arrange for the relative translation to accompany this declaration.
• The "quasi-machine" must not be used until the final machine in which it is incorporated is in turn declared as compliant, if applicable, with the provi-
sions of directive 2006/42/EC.
The product also complies, within the constraints of applicable parts, with the following standards:
EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003
Oderzo, 15.01.10
14 – English

CE DECLARATION OF CONFORMITY

and declaration of incorporation of "quasi machine"
Revision: 0
NICE s.p.a.
Via Pezza Alta 13, Z.I. Rustignè, 31046 Oderzo (TV) Italy
Sig. Oscar Marchetto
"HYKE" electromechanical gearmotor with built-in control unit
HK7024K, HK7224K
SMXI, OXI, PS124, Oview
Language: EN
Luigi Paro (Managing Director)