Publicité
The system is shipped with the inlet screen mounted. Before using the system
NOTE
please check that the inlet screen in the correct position.
The center ring can be installed as shown in the following figure.
If the chamber of the system is "baked" at a high temperature, a shield should
CAUTION!
be installed to prevent thermal radiation heating the high vacuum flange on the
pump. The maximum temperature allowed for the inlet flange is 80 °C.
Turbo-V 3K-G Pumping System User Manual / 87-901-011-01 (D)
Technical Information
Inlet Screen Installation
17
347/360
Publicité
Chapitres
