General Outline - BFT CLONIX1-2 Instructions D'installation

ENGLISH

1) GENERAL OUTLINE

Thank you for buying this product, our company is sure that you will
be more than satisfied with the performance of the product. Read the
"Instruction Manual" supplied with this product carefully, as it pro-
vides important information about safety, installation, operation and
maintenance.This product conforms to recognised technical standards
and safety regulations. It complies with the 2014/30/UE, 2014/53/UE,
European Directive and subsequent amendments. This product complies
with recognised technical standards and safety regulations. Self-learning
rolling-code radio receiver system.
This is used to configure impulse or bistable or timed outputs. The
CLONIX / MITTO system is compatible with the EElink protocol, for
fast installation and maintenance, and with the Er-Ready protocol for
copiable Replay transmitters.
2) MAINTENANCE
The maintenance of the system should only be carried out by qua-
lified personnel regularly.
MITTO transmitters are powered by a single 12V lithium battery (23A type).
Any reduction in the transmitter capacity may be due to the batteries
getting flat.
When the led of the transmitter flashes, it means that the batteries are
flat and must be replaced.
3) DISPOSAL
ATTENTION: disposal should only be carried out by qualified personnel.
Materials must be disposed of in accordance with the regulations
in force. Do not throw away your discarded equipment or used
batteries with household waste. You are responsible for taking
all your waste electrical and electronic equipment to a suitable
recycling centre.
DECLARATIONS OF CONFORMITY CAN BE FOUND AT HTTP:// WWW.
BFT-AUTOMATION.COM/CE
USER'S MANUAL
CLONIX/MITTO - 3