Seating System - Quickie 6BC Mode D'emploi

Q UI C KIE PU LS E
VEHICLE-ANCHORED BELTS
This wheelchair has an overall rating of "A" with regard to accommodating the use
and fit of vehicle-anchored belts.
This rating is scored as follows: A = Excellent, B = Good, C = Fair, D= poor.
The test for Lateral Stability Displacement for Point (P) is shown in the figure at
right. The average test result for point (P) is:
• Quickie Pulse 6 - 0.547inches (13.9mm)
• Quickie Pulse 5 - 0.547inches (13.9mm)
NOTE–Figure 5 shows the rear view of the wheelchair and human surrogate secured
on test platform and tilted to 45°.

SEATING SYSTEM

This wheelchair has been tested for seating in a motor vehicle with the factory
installed seating system only. Ensure that the factory installed seating system is
secured to the
wheelchair frame before operation. Refer to the seating system owner's manual for
further information.
CAPTAIN'S SEAT OPTION
LOCKING PIN ACTIVATION
Captains seat must be used in conjunction with WC-19 Tie-down brackets
1. Configuration for standard use (Driving the Chair)
• Locking Pin Lever (A) should be disengaged. (Figure 6)
• Backrest can be reclined or folded as needed.
2. Transit Configuration (Captains seat used in a vehicle)
• Locking Pin Lever (B) should be engaged. (Figure 7)
• Backrest is now in locked position (99°)
MAKE SURE TO ENGAGE LOCKING PIN FOR TRANSIT USE.
4 5
WARNING
6
7
WARNING
VII. WARNINGS: COMPONENTS AND OPTIONS
15
A
B
5
6
7
119832 Rev. E