Lcd Contrast - Aglient TwisTorr 304 FS AG Mode D'emploi

17 Technical Information
Programming




270/301
ANALOG OUT TYPE: permits selection of the type of signal
to be sent to the programmable analogue output. One of the
following signals can be selected:
FREQUENCY: the drive frequency of the pump is shown

POWER: the power supplied to the pump is shown

TEMPERATURE: the temperature of the pump is shown

PRESSURE: the pressure read by the gauge is shown.

START OUT MODE: Selects the operating mode of the
START output. Possible options:
RUNNING: the output is active when the pump is driven

STARTING: the output is active only during acceleration

ramp-up.
SPEED OUT MODE (KRPM/Hz): permits selection of the
unit of measurement of the speed of rotation shown on the
display of the controller.
This setting acts only on the measurement shown on the
display. Possible options:
KRPM

Hz


LCD CONTRAST

TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01