Letter Protocol Description - Aglient TwisTorr 304 FS AG Mode D'emploi

Letter Protocol Description

The default protocol is "Window"
Communication format:
8 data bit

no parity

1 stop bit

The baud rate is programmable via front panel from 600 to

Communication protocol:
Host = Master
Controller = Slave
The communication is performed in the following way:
Host
Request is an ASCII character identifying the action that must
be performed by the controller or the requested information.
Allowed ASCII characters:
"A" = START

"B" = STOP

"C" = Low Speed ON

"D" = Low Speed OFF

"E" = Request for operational parameters

"F" = Pump times zeroing

TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01
9600 baud. The controller is factory-set for 9600 baud
operation.
Technical Information

Letter Protocol Description

Controller
17
231/301