Publicité
Controller Connection
J6 – Fan
The 24 Vdc, 150 mA maximum output voltage is present after
START pushbutton is pressed and will remain present until a
fault condition is displayed on front panel display or the
turbopump is stopped.
This is a dedicated output for the optional TwisTor 304 pump
cooling fan (see orderable parts table).
If you already have fan installed, use the available adapter cable
to connect to the pump.
Figure 6
TwisTorr 304 FS AG Rack Controller User Manual / 87-901-029-01
Fan Connector
Technical Information
Controller Connection
213/301
17
Publicité
Chapitres
