Specific Safety Rules - Ryobi RY25AXB Manuel D'utilisation

 Always hold the blower in your right hand during blower
operation.
 To reduce the risk of hearing loss associated with sound
level(s), hearing protection is required.
 To reduce the risk of injury associated with contacting
rotating parts, stop the engine before installing or removing
attachments. Do not operate without all guard(s), hous-
ings, and tubes in place. Always disconnect the spark
plug before performing maintenance or accessing any
movable parts.
 Do not point the blower nozzle in the direction of people
or pets.
 Never run the unit without the blower tube installed.
 Never place objects inside the blower tube.
 Use only as directed in this operator's manual.
 Never place blower on any surface, except a hard, clean
surface when engine is running. Gravel, sand, and other
debris can be picked up by the air inlet and thrown at the
operator or bystanders, causing possible serious injuries.
 Never use for spreading chemicals, fertilizers, toxic sub-
stances, or any other hazardous chemical.
 Never use blower near fires, fireplaces, hot ashes, bar-
becue pits, etc., which may cause fire to spread.
 This product is intended for infrequent use by homeowners
and other occasional users for such general applications
as blowing leaves and lawn clippings, etc. It is not intended
for prolonged use. Prolonged periods of operation can
cause circulatory problems in the user's hands due to
vibration. For such use, it may be appropriate to use a
product having an anti-vibration feature.
FUELING
 Fuel is highly flammable. Take precautions when using
to reduce the chance of serious personal injury.

SPECIFIC SAFETY RULES

4 - English
 Store fuel in a cool, well-ventilated area, safely away from
spark and/or flame-producing equipment.
 Store fuel in containers specifically designed for this
purpose.
 Only refuel outdoors and do not smoke while refueling.
 Add fuel before starting the engine. Never remove the cap
of the fuel tank or add fuel while the engine is running or
when the engine is hot.
 Do not smoke while handling fuel.
 Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.
 Tighten the fuel cap securely after refueling.
 Wipe spilled fuel from the unit. Move 30 feet away from
refueling site before starting engine.
 Never attempt to burn off spilled fuel under any
circumstances.
 To reduce the risk of fire and burn injury, handle fuel with
care. It is highly flammable.
 If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
 Replace all fuel tank and container caps securely.
 Empty fuel tank into a container approved for gasoline
and restrain the unit from moving before transporting in
a vehicle.
 When draining the fuel tank, use an approved fuel storage
container in a well-ventilated area.
 Select bare ground, stop engine, and allow to cool at
least five minutes before refueling.
 Save these instructions. Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also.