Agilent Technologies TwisTorr 74 FS AG Mode D'emploi page 145

Compliance with standards
Safety:
Radio Interference:
Harmonics:
Flicker:
ESD:
Radiated RF Immunity:
Burst:
Surge:
Conducted RF Immunity:
Radiated Magnetic Field:
DIPS:
Weight:
Max. Altitude
Internal use only
Pollution Degree
Installation Category
All connecting cables for Remote I/O and serial connections, if longer than 3m,
NOTE
must be of the shielded type
The controller supplied voltage must be easily disconnected (through a circuit
NOTE
bracker or having acces to the power supply cable plug).
When the TwisTorr 74 FS AG On-board has been stored at a temperature of less
NOTE
than 5 °C, wait until the system has reached the above mentioned temperature
before to power it.
TwisTorr 74 FS AG On-board Controller User Manual / 87-901-054-01
Technical Information
Controller Specifications
EN 61010 - 1 (2001)
EN 55011 (Class-A)
EN 61000-3-2,
EN 61000-3-3,
EN 61000-6-2 (2005)
EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
EN 61000-4-8
EN 61000-4-11
500g (230V) 300g (24V)
3000m
2
II
17
145/192