Powering On/Off Your Phone - ZTE C E520 Manuel D'utilisation

3. Pull the microSD card completely out of the slot.
4. Close the back cover.
Note: Do not remove the memory card while reading or writing to the card. Doing so may
cause data corruption on the card or phone. If possible, insert and remove the memory
card when the phone is powered off.

Powering On/Off Your Phone

 To power on the phone, press and hold the End Key until the LCD screen lights up.
If the handset lock code has been activated, the phone will prompt you to enter the code.
The default lock code for an inactivated phone is 0000. Once you have activated your
handset, the default lock code will be the last 4 digits of your phone number.
 To power off the phone, press and hold the End Key until the display turns off.
Warning: Do not power the phone on when wireless phone use is prohibited, or when it
may cause interference or danger.
17