Charging The Battery; Powering On/Off Your Phone - ZTE Kis 3 Guide De Démarrage Rapide

NOTE: Some applications may require a
microSDHC card to work normally or may store
certain data on it. Therefore, it is recommended
that you keep a microSDHC card installed and
not remove or replace it randomly.

Charging the Battery

1. Connect the adapter to the charger jack.
Ensure that the adapter is inserted with the
correct orientation.
2. Connect the charger to a standard AC wall
outlet.
3. Disconnect the charger when the battery is
fully charged.
WARNING! Use only ZTE-approved chargers
and cables. The use of unapproved accessories
could damage your phone or cause the battery
to explode.

Powering On/Off Your Phone

Make sure the battery is charged before
powering on.
● Hold the Power Key to switch on your
phone.
To switch it off, hold the Power Key to get
●
the phone options. Touch Power off, and
then touch OK.
9