Charging The Battery; Powering On/Off - ZTE Blade Apex2 Guide De Démarrage Rapide

Blade Apex2 Quick Start Guide欧洲合订-0417.indd 8
NOTE: microSDHC Logo is a trademark of
SD-3C, LLC.
4. Put the back cover back into place.

Charging the Battery

When you first get your new phone you'll need to
charge the battery.
WARNING! Use only ZTE-approved chargers
and cables. The use of unapproved accessories
could damage your phone or cause the battery
to explode.
CAUTION: Do not change the built-in
rechargeable battery in your phone by yourself.
The battery can only be changed by ZTE or ZTE
authorised service provider.
1. Connect the adapter to the charger jack.
2. Connect the charger to a standard AC power
outlet.
3. Disconnect the charger when the battery is
fully charged.

Powering On/Off

Make sure the micro-SIM card is in your phone
and the battery is charged.
• Press and hold the Power Key to turn on
your phone.
8
2014-4-22 15:56:01