Functions; Removing The Shelves; Storage - AVG VINOPAZZO VPC27SS Manuel D'utilisation

3. OPERATING YOUR APPLIANCE (continued)
FUNCTIONS (continued)
Before reconnecting the power, wait 3 to 5 minutes. Otherwise you could damage your appliance. If
you attempt to start the appliance before the end of this time delay, the appliance will not turn on.
If you turn on the appliance for the first time or after a restart, or after it has been out of operation
for a long time, there may be a temperature difference between the temperature inside the
appliance and what appears on the LED display. This is a normal event caused by the duration of the
inactivation period. Leave the appliance turned on for several hours and the temperatures will
stabilize during operation

REMOVING THE SHELVES

1.
Make sure to open the door completely to avoid damaging the door gasket.
2.
Remove all of the contents loaded on the shelves.
3.
Pull the shelf towards your until it is fully extended outward.
4.
The shelf has plastic posts on both sides as indicated in the diagram below. While facing the
unit, press the plastic post on the right side down while pulling up on the left plastic post. You
may choose to do this by hand or by using a flathead screwdriver.
5.
Evenly pull out the shelf from the track until it is completely removed from the inner
compartment.

STORAGE

This unit can store up to 27 wine bottles. The unit's capacity is based on a regular 750 ml 'Bordeaux'
style bottle (see below for size/dimensions): The unit has 6 shelves holding 4 bottles plus 3 bottles on
the lowest shelf of the cabinet.
22