Functions; Temperature Memory Function; "Close Door" Reminder Function - AVG VINOPAZZO VPB50SS Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. OPERATING YOUR APPLIANCE (continued)

FUNCTIONS

TEMPERATURE MEMORY FUNCTION

 
If the power is suddenly lost, the set temperature will be saved by the unit. Once the power is back on, 
the unit will be at the same set temperature. 

"CLOSE DOOR" REMINDER FUNCTION

When you forget to close the door or the door is not fully closed, there will be warning alarm after five 
(5) minutes. 
TEMPERATURE ALARM FUNCTION
If the interior temperature is higher than 23° C (73° F), the "HI" message is shown on the display panel 
and a buzzer alarm will sound continuously after one hour. This indicates that the inner temperature is 
too high and you should look for the reason. If the inner temperature is lower than 0° C (32° F), the 
"LO" message is shown on the display panel.  The alarm and the malfunction indicator light go on at 
the same time. 
NOTES
If too many bottles are put in at once or the door has not been closed tightly, the unit will display the 
"HI" message on the display panel. This is normal. Please wait five (5) minutes after closing the door 
and the "HI" message will disappear. 
   
It is normal that the display shows the "HI" or "LO" message from time to time. If it occurs frequently 
or lasts for a long time, restart the unit by unplugging it, then re‐plugging after five (5) minutes.  If the 
problem re‐occurs after restarting, please contact Customer Service. 
   
Before reconnecting the power, wait three (3) to five (5) minutes. Otherwise, you could damage your 
appliance. If you attempt to start the appliance before this delay, the appliance will not turn on. 
   
If  you  turn  on  the  appliance  for  the  first  time,  after  a  restart  or  after  it  has  been  out  of 
operation for a long time, there may be a temperature difference between the temperature inside the 
unit and that on the LED display. This is normal due to the duration of the inactivation period. Leave 
the appliance turned on for several hours and the temperatures will stabilize during operation. 
24 
 

Publicité

Chapitres

Table des Matières
loading

Table des Matières