Temperature Settings; Functions; Temperature Memory Function - AVG Prymo ABC160S Manuel D'utilisation

3. OPERATING YOUR APPLIANCE (
WINE STORAGE
If you are storing wine for long periods of time, it should be stored at a temperature of between 10° C
and 14° C (50° F and 57° F). The following drinking temperatures are recommended for the various
types of wine:
Red wines: +14° C to +18° C (57° F to +64° F)
Rosé wines: +10° C to +12° C (50° F to +54° F)
White wines: +8° C to +12° C (46° F to +54° F)

TEMPERATURE SETTINGS

The zone temperature may have a difference of +/‐ 3° C (+/‐ 5ᵒ F) from the setting depending on
loading and ambient conditions. For example, placing your unit in extreme cold or hot conditions may
cause interior temperatures to fluctuate.
To set the temperature:

Use the /
are pressed, the temperature will increase / decrease by increments of one degree.

You can set the temperature in the range of 36° F to 64° F.

FUNCTIONS

TEMPERATURE MEMORY FUNCTION

If power is suddenly lost, the set temperature will be saved by the unit. Once the power is back on, the
unit will be at the same set temperature.
"CLOSE DOOR" REMINDER FUNCTION
When you forget to close the door or the door is not fully closed, a warning alarm will sound after five
(5) minutes.
TEMPERATURE ALARM FUNCTION
If the interior temperature is higher than 23° C (73° F), the "HI" message appears on the display panel
and an alarm will sound continuously after one hour. This indicates that the inner temperature is too
high and you should look for the reason. If the inner temperature is lower than 0° C (32° F), the "LO"
message appears on the display panel. The alarm and the malfunction indicator light go on at the
same time.
NOTES
If too many bottles are placed in at once or the door is not closed tightly, the ''HI'' message will appear
on the display panel. This is normal. Wait five minutes after closing the door and the message will
disappear.
It is normal that the display panel shows the "HI" or "LO" message from time to time. If it occurs
frequently or lasts for a long time, restart the unit by unplugging it, then re‐plugging it after five (5)
minutes. If the problem re‐occurs after restarting, please contact Customer Service.
Before reconnecting the power, wait three to five minutes. Otherwise, you could damage the unit. If
you attempt to start the appliance before this delay, the appliance will not turn on.
If you turn on the appliance for the first time, after a restart or after it has been out of
operation for a long time, there may be a temperature difference between the temperature inside the
unit and that on the LED display. This is normal. Leave the appliance turned on for several hours and
the temperatures will stabilize.
buttons to set the desired temperature. Each time the
)
CONTINUED
/ buttons
20