Cleaning The Fittings; Noises; Normal Noises; Preventing Noises - Thermador T18ID900RP Guide D'utilisation Et D'entretien

en-us Noises

Cleaning the fittings

To clean, take the variable parts out of the
appliance.
~ "Interior fittings" on page 10
Ice cube container
9
CAUTION!
A full ice cube container is heavy:
■
Pull the container out with both hands.
Risk of cold burns:
■
Avoid prolonged contact of the skin with
frozen food, ice and metal surfaces in the
freezer compartment.
To ensure you always have fresh ice cubes and to
prevent old ones from sticking together, remove
them and clean the ice cube container regularly.
Lift the ice cube container.
1.
Slowly pull out the ice cube container.
2.
Empty and clean the ice cube container with
3.
lukewarm water.
Dry the inside of the ice cube container off well so
4.
new ice cubes do not freeze and stick to it.
Insert the ice cube container until it engages.
5.
Note: If the ice cube container cannot be inserted,
rotate the conveyor and try again.
22
Drip tray
You can remove the drip tray to clean.
Remove the grate for drips.
1.
Remove the drip tray.
2.
Empty and clean the drip tray with lukewarm
3.
water.
Reinsert the drip tray and the grate for drips.
4.
>Noises

Normal noises

N o i s e s
Droning: A motor is running, e.g. refrigerating unit,
ventilator.
Bubbling, buzzing or gurgling: Refrigerant is
flowing through the tubes.
Clicking: Motor, switches or solenoid valves are
switching on or off.
Cracking: Automatic defrosting is running.

Preventing noises

Appliance is not level: Align appliance using a
water level. If required, place a little packing
underneath.
Containers, shelves or storage compartments
wobble or stick: Check the removable fittings and
re-insert if required.

9Lighting

Your appliance features a maintenance-free LED
L i g h t i n g
light.
Only customer service or authorized technicians may
repair the light.