Thermador T18ID900RP Guide D'utilisation Et D'entretien page 13

Masquer les pouces Voir aussi pour T18ID900RP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

9
CAUTION!
To reduce the risks associated with property
damage due to water leakage:
Read and follow user instructions before
installation and use of this system.
Installation and use must comply with all state
and local plumbing codes.
Do not install if water pressure exceeds
120 psi/827 kPa. If your water pressure
exceeds 80 psi, you must install a pressure
limiting valve.
Contact a plumbing professional if you are
uncertain how to check your water pressure.
Do not install where water hammer conditions
may occur. If water hammer conditions exist,
you must install a water hammer arrester.
Contact a plumbing professional if you are
uncertain how to check for this condition.
Do not install on hot water supply lines. The
maximum operating water temperature of this
filter system is 100 °F (38 °C).
Protect filter from freezing. Drain filter when
temperatures drop below 33 °F (1 °C).
The disposable filter cartridge must be
replaced
no later than every 6 months at the rated
capacity, or if a noticeable reduction in flow
rate occurs.
Manufactured by:
3M Purification Inc.
400 Research Parkway
Meriden, Ct 06450
Tel. (800) 222-7880
Tel. (203) 237-5541
3M is a trademark of 3M Company used under
license.
NSF is a trademark of NSF International.
© 2013 3M Company. All rights reserved.
Getting to know your appliance en-us
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T18id900lpT24id900rpT24id900lp

Table des Matières