Error Messages & Protections - STEAMAX MAJESTY Manuel D'utilisation

STEAMAX MAJESTY – ERROR MESSAGES & PROTECTIONS
12-second safety feature
If you press and hold the Fire button for more than 12 seconds, the unit will automatically switch off. Press the
Fire button once to continue vaping.
Overheating protection ("TEMPERATURE TOO HIGH")
If this appears, the internal temperature of the battery carrier is too high. Please wait 30 seconds before
continuing to vape.
Input voltage too low ("VOLT TOO LOW")
The input voltage is below 6.4 volts and therefore too low. Please recharge the device.
Input voltage too high ("VOLT TOO HIGH")
If the input voltage is too high, the device cannot be operated. Please replace the battery with a new one that
meets the requirements stipulated here.
No atomizer head detected ("NO ATOMIZER")
The device could not detect a atomizer head. Please install a atomizer head or check that it.
61
www.steamax.com