Selection & Operating Of The Menus - STEAMAX MAJESTY Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STEAMAX MAJESTY – SELECTION & OPERATING OF THE MENUS
Menu selection
1. Press the Fire button rapidly 5 times within 2 seconds to switch on the device. "SMOK" will be shown on the
display. The device is now switched on.
2. Press the Fire button rapidly 3 times while the device is switched on. Menus 1 to 4 will be displayed.
Use the "UP" and/or "DOWN" buttons to navigate to the menu you want to select.
Setting of the operating mode
Confirm by pressing the fire button and „DOWN" in the menu „W" to select the variable Watt mode from the steam
modes „W (VW)", „TI, NI, SS (TC)" or „MEMORY MODE". Alternatively, you can change the modes by quickly pressing the
fire button three times and holding the fire button longer to confirm the selection.
Press the Fire button in "WATT MODE" to select the "STRENGTH" of the pull from the range of HARD, SOFT or NORM.
In "TEMP MODE" you choose the coil type of your atomizer head from T-Ni (Nickel200), T-Ti (titanium) or T-SS
(stainless steel) and adjust the temperature coefficient of the resistor by pressing the adjustment buttons.
In "MEMORY MODE, " select the power settings M1 to M22. Close your selection and return to the main menu by
pressing the Power button.
58
www.steamax.com

Publicité

Table des Matières
loading

Table des Matières