Using Your Appliance; Filling The Water Tank - Bosch 8 VarioComfort TDS80 Série Notice D'utilisation

Using your appliance

3x
18
B O SC H

1. Filling the water tank

This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other liquids,
such as perfume, vinegar, starch, condensation water from
tumble dryers or air conditioning systems, or chemicals will
damage the appliance. Any damage caused by the use of the
aforementioned products will make the guarantee void!
1 Remove the water tank (10).
2 Fill the water tank. Never fill beyond the level "max" (11)
for maximum filling !
3 Fit the water tank back onto the appliance.
Refill the water tank when the indicator light (4) comes on. Three
beeps will be heard.
Important: Once refilled, press button (4).
Tip: To prolong the optimum steam function, you may mix tap
water with distilled water 1:1. If the tap water in your area is very
hard, mix tap water with distilled water 1:2.
ºC
2. Heating
1 If your steam station is equipped with an iron lock system
(13*), release the iron by pressing the button.
2 Unwind the steam hose (6) and the mains cable (7). Plug
mains cable into an earthed socket.
3 Press the button (2) to switch the appliance on. Indicator
lights (2, 16) will flash indicating that the appliance is
heating up.
4 Turn programme selector (1) to choose the kind of fabric to
be ironed.
* Model dependent