Using Your Appliance; Filling The Water Tank - Bosch I2 Série Notice D'utilisation

Using your appliance

18
B O SC H
This appliance has been designed to use normal tap
water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or air conditioning systems, or
chemicals will damage the appliance. Any damage
caused by the use of the aforementioned products will
make the guarantee void!
1 Open the filling lid (14).
2 Fill the water tank (11). Never fill beyond the level
"max" (13) for maximum filling !
3 Close the filling lid.
min min
Note: Keep the water level in the water tank above the
level mark for minimum filling "min" (12).
Tip: To prolong the optimum steam function, you may mix
tap water with distilled water 1:1. If the tap water in your
area is very hard, mix tap water with distilled water 1:2.
ºC
1 Unwind the water hose (8) and the mains cable (9).
Plug mains cable into an earthed socket.
2 Press "on/off" button (5) to switch the appliance on.
"Medium steam" indicator light (3) will flash indicating
that the appliance is heating up.
3 When the iron is ready to use, the "medium steam"
indicator light (3) will remain permanently lit. Two
beeps will be heard.
Important: During the first seconds of use the amount of
steam will be lower and it will increase progressively.

1. Filling the water tank

2. Heating
* Model dependent