Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Assembly Instructions
Put everything clearly on the ground and control the comple-
teness based on the assembly steps. Attention: The simplified
assembly process requires 100% attention. Especially in the
crease and folding positions. Assembly time is approx. 20min.
Step 1:
1. Remove all small parts, loose packing material out of the box
and then take out with help of a second person the preassem-
bled frame of packaging. Don't cut the nylon strap for remo-
ving the base frame from carton.
Step 2:
1. Place the screws (42) and teeth washers (60) on left and right
side of base frame(1).
2 Cut now the nylon strap and fold up with care the supports left
and right side (3L+3R). Take a special view on the right support
(3R), because no squeezing the cable.
3. Screw tightly the supports (3L+3R) at base frame by using
screws (42) and teeth washers (60).
4. Fold up the computer (12) into right position and tighten with
screws (42) and teeth washers (60).
17
Publicité
Table des Matières
