Maintenance; Malfunctions / Troubleshooting; Decommissioning / Disposal - Dimplex SIH 40TE Instructions D'installation Et D'utilisation

SIH 40TE

9.4 Maintenance

Devices with a minimum of 3kg refrigerant, or hermetically
sealed devices with a minimum of 6 kg refrigerant must be leak-
proof tested yearly by the operator according to ES842/2006.
The leak-proof testing is to be documented and archived for a
minimum of 5 years. The test is to be carried out by certified per-
sonnel only according to (EG) Nr. 1516/2007. The attached table
can be used as a basis for the documentation.
NOTE
Local regulations may differ from EU directive 842/2006. The appropriate
local regulations for heat pump leak tests must be observed.
EN-10
10 Malfunctions /
Troubleshooting
This heat pump is a quality product and designed for troublefree
operation. In the event that a malfunction occurs nevertheless, it
will be indicated on the display of the heat pump manager. Sim-
ply consult the Malfunctions and Troubleshooting table contained
in the in-stallation and operating manual of the heat pump man-
ager (manager).
If you cannot correct the malfunction yourself, please contact the
after-sales service agent in charge.
ATTENTION!
All work on the heat pump may only be performed by an authorised an
qualified after-sales service.
ATTENTION!
Disconnect all electrical circuits from the power supply before opening
the enclosure.
11 Decommissioning /
Disposal
Before removing the heat pump, disconnect the unit from the
power source and close all valves. The heat pump must be in-
stalled by trained personnel. Environment-relevant requirements
regarding the recovery, recycling and disposal of service fuels
and components in accordance with all relevant standards must
be adhered to. Particular attention must hereby be paid to the
proper disposal of refrigerants and refrigeration oils.
452234.66.08 · FD 9310 www.dimplex.de