Thermador PRO-GRAND PRG30 Guide D'utilisation Et D'entretien page 10

Remove all packaging materials and temporary labels
from oven and cooktop.
1. Check that you have the items listed on page 7.
2. Record the Model and Serial number on page 38.
See "Data Rating Label." These may be used for any
future contacts with Customer Service. Enter this
information on the Product Registration Card included
with this product then mail it to the indicated address.
3. Optional Accessories: Gliding Oven Racks (all sizes),
Grill Plate, Chopping Board, Griddle Cover, Wok
Support Ring, and other accessories are available from
your Thermador Dealer.
WARNING:
To help prevent burns, NEVER remove or
reposition the oven racks while the oven is ON
or while the oven is cooling.
4. Position the racks correctly in the oven. The correct
rack position depends on the recipe and the cooking
mode. The rack positions are numbered from the
bottom of the oven, like an elevator. Rack position 3
is the most frequently used position. Place rack(s) in
the proper position before turning on the oven.
Insert the racks as follows:
a) Hold the rack with the back rail in the up position
towards the rear of the oven. Slip it into the oven so
the rack slides are between the rack and the rack
guides.
b) Tip the front of the rack up slightly as it slides into
the oven so that the safety stops clear the rack
slides. The safety stops on the back of the rack will
keep it from sliding out of the oven when it is pulled
forward.
Figure 1: Large Oven Rack Positions
English 8
5. Gliding oven Racks (on some models): The
Thermador gliding oven rack can be pulled out and
pushed back into the oven with minimal effort — even
while supporting a large turkey or roast.
Gliding oven racks are standard in ranges with black
porcelain spill trays. Positioning these racks is the
same as described previously in "Position the racks
correctly in the oven." These premium oven racks are
also available from your Thermador Dealer as optional
accessories.
Placing Rack In Oven:
To insert a rack in the oven, hold the rack with the back
rail up toward the back. Place the safety hooks under
the front of the rail guides. Push the rack into the oven,
lifting the rack stops over the front of the rail guides.
Slide the rack into position.
When placing food on a rack, pull the rack out to the
stop position. The racks are designed to lock and not
tilt while in fully-extended position.
Removing Rack from Oven:
To remove or reposition a rack in the oven, pull the rack
toward the front of the oven. Lift up the front of the rack
over the safety stops and pull the rack from the oven.
IMPORTANT:
Always remove the gliding oven racks before self-cleaning
the oven. If the gliding racks remain in the oven during Self
Clean, lubricants in the glide mechanisms of each rack will
be lost and the finish will discolor.
5
4
3
2
1
Always remove
before Self Clean
Figure 2: Gliding Oven Rack