Air Supply; Operating Pressure - Interchange NSR83-21 Manuel D'utilisation

NSR83-21
NSC83-28
NSC83-34
8
OPERATING THE NAILER
(Options for all tool models)

AIR SUPPLY

Power source (Compressor)
ƒ Use only clean, dry, regulated compressed air as a
power source for this nailer.
ƒ Never use oxygen or other bottled gases, as an
explosion may occur.
ƒ Air compressors used to supply compressed air to
this nailer must comply with the requirements of
the latest version of ANSI Standard B 19.3 Safety
Standard for Compressors for Process Industries.
ƒ Moisture or oil in the air compressor may accelerate
wear and corrosion in the nailer.
ƒ Drain daily.

OPERATING PRESSURE

ƒ Recommended operating pressure is 70 to 120psi.
ƒ Select the operating pressure within this range for
the best fastener performance. The nail length and
thickness and the hardness of the wood are factors in
determining what the pressure should be set at.
ƒ Do not exceed this recommended operating
pressure.
ƒ Moisture or oil in the air compressor may accelerate
wear and corrosion in the nailer.
ƒ Drain daily.
Interchange Brands Framing Nailers: Operator's Manual