Nail Loading - Interchange NSR83-21 Manuel D'utilisation

NAIL LOADING

CARGANDO CLAVOS
CHARGEMENT DES
CLOUS
NSR83-21
NAIL LOADING
CARGANDO CLAVOS
CHARGEMENT DES
CLOUS
NSC83-28
NSC83-34
4
1
Nail Feeder
5
NSR83-21 TOOL USE:
1
ƒ Pull the nail feeder back until it latches.
2
ƒ Insert nail strips one by one into the slot from above
the magazine.
3
ƒ Press the stop lever and slide the nail feeder forward
until it makes contact with the nail strip.
Notes:
ƒ Nail strips should include minimum 5 nails.
4
ƒ Attach the air supply. The nailer is now ready to
operate.
NSC83-28 and NSC83-34 TOOL USE:
5
ƒ Load the nails in the magazine; insert the first of the
nails into the opening at the rear of the magazine.
6
ƒ Ensure the heads of the nails line up and slide on the
nail rail. Engage the last nail and release.
ƒ Pull the nail feeder from the front of the tool to the
rear and release it engaging the back of the nail strip.
7
ƒ Attach the hose to the Quick Connect Coupler on the
back of the nailer.
8
ƒ The nailer is now ready to operate.
Interchange Brands Framing Nailers: Operator's Manual
2
6