Nordica FULVIA Instructions Pour L'installation, L'utilisation Et L'entretien page 20

(1) Industrial chimney cap
with
elements – it allows an
excellent discharge of the
smokes.
50 cm
2 m
1
m
20
pre-fabricated
10 m
>A
H min.
(1)Ridge axis
α
(2) Handicraft chimney cap.
The right output section must
be at least twice as big as the
internal section of the flue
(ideal value: 2.5 times).
(1) In case of flues side by side, a chimney cap must be higher
than the other one of at least 50 cm in order to avoid pressure
transfers between the flues themselves.
(1) The chimney cap must not show hindrances within 10 m from
walls, pitches and trees. Otherwise raise it of at least 1 m over the
hindrance.
The chimney cap must exceed the ridge of the roof of at least 1 m.
> _ A
0,5 m
(2)Roof
FULVIA – GAIA
(3) Chimney cap for steel
flue with conical deflector
of smokes.
Picture 4
Picture 5
Picture 6
Picture 7
7191010 – EN