Velleman Real Plug-and-Play CAMIP6 Notice D'emploi page 22

• Click Next >. If the CamView or similar software will be installed, keep all files.
• Click Finish to close the uninstaller.
8. 3GGP software installation
• mCamView is the software that is required to view the IP Camera images using an ID and
password.
• No public IP address is needed for the IP camera.
• No port mapping or DDNS is needed for router configuration.
• Simply enter the ID/password of the IP camera to view the video from your mobile phone or PDA.
Windows 3G mobile
• Go to http://www.starvedia.com/3GMobileSoftware.html.
• Verify whether your Windows mobile device is supported by selecting 7. Windows Mobile
phones list on that website.
• Follow the instructions on that website to download and install the .cab-file.
Symbian 3G cell phone
• Make sure your mobile device runs at least Symbian S60 operating system.
• Go to http://www.starvedia.com/3GMobileSoftware.html
• Verify whether your Windows mobile device is supported by selecting 7. Symbian phones list
on that website.
• Follow the instructions on that website to download and install the .sisx-file.
iPhone
• search "mCamView" on App store on iPhone and install the software.
15/09/2010
CAMIP6
22 ©Velleman nv