Replacing The Oven Light Bulb; Customer Service - Bosch HSG738257 M Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Customer service

en

Replacing the oven light bulb

If the oven light bulb fails, it must be replaced.
Replacement heat-resistant bulbs can be obtained from
the after-sales service or from specialist retailers.
Please specify the E number and FD number of your
appliance. Do not use any other type of bulb.
:
Warning – Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
Allow the cooking compartment to cool down.
1.
Open the appliance door.
2.
Place a tea towel in the cooking compartment to
3.
prevent damage.
Remove the hook-in racks.
4.
Remove the glass cover. To do this, open the glass
5.
cover at the front with your hand. Should you
experience difficulties removing the glass cover, use
a spoon to help.
Remove the oven light bulb.
6.
Replace the oven light bulb with a bulb of the same
7.
type:
Voltage: 230 V;
Power: 40 W;
Fitting: G9;
Temperature resistance: 300 °C
Refit the glass cover for the oven light bulb.
8.
Refit the hook-in racks.
9.
Remove the tea towel.
10.
Switch the circuit breaker back on.
11.
Check that the oven lighting is working again.
12.
22
4Customer service
Our after-sales service is there for you if your appliance
C u s t o m e r s e r v i c e
needs to be repaired. You will find the address and
telephone number of your nearest after-sales service
centre in the phone book. The after-sales service
centres listed will also be happy to give you the details
of an after-sales service point near you.
Please quote the E number (product
E number and FD
number) and FD number (production
number
number) of the appliance when
contacting the after-sales service. The
rating plate and the relevant numbers
can be found on the inside of the
storage compartment flap. So that
you do not have to spend a long time
looking for it if there is a fault, you can
enter the data for your appliance here
now.
E no.
After-sales service O
FD

Publicité

Table des Matières
loading

Table des Matières