Packet Data; Enhancements - Nokia 5070 Guide D'utilisation

IR connection indicator
When is displayed continuously, the IR connection is activated, and your phone is ready
to send or receive data through its IR port.
When blinks, your phone is trying to connect to the other device, or a connection has
been lost.

Packet data

Enhanced general packet radio service (GPRS), packet data, is a network service that allows
mobile phones to send and receive data over an Internet protocol (IP)-based network. It
enables wireless access to data networks such as the Internet.
The applications that may use packet data are MMS, browsing sessions, e-mail, remote
SyncML, Java application downloading, IM, and the PC dial-up.
To define how to use the service, select Menu > Settings > Connectivity > Packet data >
Packet data connection.
Select When needed to set the packet data connection to be established when an application
needs it. The connection will be closed when the application is ended.
Select Always online to set the phone to automatically connect to a packet data network
when it is switched on.
indicates a packet data connection.
Modem settings
To connect the phone, use an IR or a data cable (CA-42) connection to a compatible PC, and
use the phone as a modem to enable packet data connectivity from the PC.
To define the settings for connections from the PC, select Menu > Settings > Connectivity >
Packet data > Packet data settings > Active access point, activate the access point you want
to use, and select Edit active access point. Select Alias for access point, and enter a nickname
for the currently selected access point. Select Packet data access point, and enter the access
point name (APN) to establish a connection to an EGPRS network.
To set the dial-up service settings (access point name, APN) on your PC, use the Nokia Modem
Options software. See "Nokia PC Suite," p. 53. If you have set the settings both on the PC and
on your phone, the PC settings are used.
■

Enhancements

This menu is displayed only if the phone is or has been connected to a compatible mobile
enhancement.
Select Menu > Settings > Enhancements. You can select an enhancement menu if the
corresponding enhancement is, or has been, connected to the phone. Depending on the
enhancement, select from the following options:
Default profile — to select the profile that you want to be automatically activated when you
connect to the selected enhancement
37