Connectivity - Nokia 5070 Guide D'utilisation

Phone language — to set the display and writing language
Memory status — to view the free memory and the used memory in Gallery, Messaging,
and Applications
Automatic keyguard — to set the keypad of your phone to lock automatically after a preset
time delay when the phone is in the standby mode and no function of the phone has been
used. Select On, and set the time from 5 seconds to 60 minutes.
Security keyguard — to set the phone to ask for the security code when you unlock the
keyguard. Enter the security code, and select On.
When the keyguard is on, calls still may be possible to the official emergency number
programmed into your device.
Cell info display > On — to receive information from the network operator depending on the
network cell used (network service)
Welcome note — to enter a welcome note to be displayed briefly when the phone is switched on
Operator selection > Automatic — to set the phone automatically to select one of the cellular
networks available in your area. With Manual, you can select a network that has a roaming
agreement with your home network operator.
Confirm SIM service actions — See "SIM services," p. 53.
Help text activation — to select whether the phone displays help texts
Start-up tone — to select whether the phone plays a start-up tone when the phone is
switched on
■

Connectivity

To connect your phone to compatible devices, use an infrared connection. You can also define
the settings for packet data dial-up connections.
Infrared
You can send or receive data to or from a compatible phone or data device (for example, a
computer) through the infrared (IR) port of your phone. To use an IR connection, the device
with which you want to establish a connection must be IrDA compliant.
Do not point the IR (infrared) beam at anyone's eyes or allow it to interfere with other IR devices.
Infrared devices are Class 1 laser products.
When sending or receiving data, ensure that the IR ports of the sending and receiving devices
are pointing at each other and that there are no obstructions between the devices.
To activate the IR port of your phone to receive data using IR, select Menu > Settings >
Connectivity > Infrared.
To deactivate the IR connection, select Menu > Settings > Connectivity > Infrared. When the
phone displays Deactivate infrared?, select Yes.
If data transfer is not started within 2 minutes after the activation of the IR port, the connection
is canceled and must be started again.
36