Save radio stations
1. To start the station search, select and hold
in 0.05 MHz steps, briefly press
2. To save the station to a memory location, 1 to 9, press and hold the corresponding number
key. To save the station in the memory location from 10 to 20, briefly press 1 or 2, and
press and hold the desired number key, 0 to 9.
3. Enter the name of the station, and select OK.
Listen to the radio
Select Menu > Media > Radio. To scroll to the desired station, select
headset key. To select a radio station location, briefly press the corresponding number keys.
Select Options and from the following options:
Turn off — to turn off the radio
Save station — to save a new station and enter the station name
Stations — to select the list of saved stations. To delete or rename a station, scroll to the
desired station, and select Options > Delete station or Rename.
Mono output or Stereo output — to listen to the radio in monophonic sound or in stereo
Loudspeaker or Headset — to listen to the radio using the loudspeaker or headset. Keep the
headset connected to the phone. The lead of the headset functions as the radio antenna.
Set frequency — to enter the frequency of the desired radio station
You can normally make a call or answer an incoming call while listening to the radio.
During the call, the volume of the radio is muted.
When an application using a packet data or HSCSD connection is sending or receiving data,
it may interfere with the radio.
■
Recorder
You can record pieces of speech, sound, or an active call for up to 5 minutes. The actual recording
time depends on the available memory space.
The recorder cannot be used when a data call or packet data connection is active.
Record sound
1. Select Menu > Media > Recorder.
To use the graphical keys,
key, and select it.
2. To start the recording, select
Record. While recording a call, all parties to the call hear a faint beeping sound about every
5 seconds. When recording a call, hold the phone in the normal position near your ear.
or
or
.
,
, or
on the display, scroll left or right to the desired
. To start the recording during a call, select Options >
. To change the radio frequency
or
, or press the
41