Access Codes; Pin Codes; Puk Codes; Restricting Password - Nokia 5070 Guide D'utilisation

■

Access codes

Security code
The security code (5 to 10 digits) helps to protect your phone against unauthorized use. The preset
code is 12345. To change the code and to set the phone to request the code, see "Security," p. 38.

PIN codes

The personal identification number (PIN) code and the universal personal identification
number (UPIN) code (4 to 8 digits) help to protect your SIM card against unauthorized use.
See "Security," p. 38.
The PIN2 code (4 to 8 digits) may be supplied with the SIM card and is required for some
functions.
The module PIN is required to access the information in the security module. See "Security
module," p. 51.
The signing PIN is required for the digital signature. See "Digital signature," p. 52.

PUK codes

The personal unblocking key (PUK) code and the universal personal unblocking key (UPUK)
code (8 digits) are required to change a blocked PIN code and UPIN code, respectively. The
PUK2 code (8 digits) is required to change a blocked PIN2 code. If the codes are not supplied
with the SIM card, contact your local service provider for the codes.

Restricting password

The restricting password (4 digits) is required when using Call restrictions. See "Security," p. 38.
■

Configuration settings service

To use some of the network services, such as mobile Internet services, MMS, Nokia Xpress
audio messaging, or remote Internet server synchronization, your phone needs the correct
configuration settings. You may be able to receive the settings directly as a configuration
message. After receiving the settings, you need to save them on your phone. The service
provider may provide a PIN that is needed to save the settings. For more information on
availability, contact your network operator, service provider, nearest authorized Nokia
dealer, or visit the support area on the Nokia Web site.
When you receive a configuration message, Configuration sett. received is displayed.
To save the settings, select Show > Save. If the phone requests Enter settings' PIN:, enter the
PIN code for the settings, and select OK. To receive the PIN code, contact the service provider
that supplies the settings. If no settings are saved, these settings are saved and set as default
configuration settings. Otherwise, the phone asks Activate saved configuration settings?.
To discard the received settings, select Exit or Show > Discard.
To edit the settings, see "Configuration," p. 38.
9