What If; Technical Malfunctions; Repair; Product Specifications - Ivoclar digital UTS CAD Mode D'emploi

8 What If...

This chapter will help you to recognize malfunctions and
take appropriate measures or, if possible, to perform some
minor repairs.

8.1 Technical malfunctions

Description Instructions for
Users
The surface of Was the surface
the device is cleaned or
scratched manipulated with
a sharp object?
The surface of Was the surface
the device is cleaned with acid
damaged or par- or a solvent?
tially dissolved
The surface of Was the surface
the device is par- cleaned with
tially dissolved an unsuitable
disinfectant?
The joints for Have the
the angle setting components
can no longer be been correctly
soundly locked mounted after
the device was
disassembled?

8.2 Repair

Repairs may only be carried out by a certified Ivoclar
Vivadent Service Centre. If repairs during the warranty
period are not carried out by a certified Service Centre, the
warranty will expire immediately. Please also refer to the
corresponding warranty regulations.
24

9 Product Specifications

9.1 Delivery form

1 UTS CAD
1 Bite fork
1 Operating Instructions
Measures
Do not scratch

9.2 Technical data

the surface with
a sharp object
Weight (approximately):
Bite fork: 11 g
UTS CAD basic bow: 20 g
UTS CAD complete: 98 g
Do not use any
Dimensions:
acids or solvents
Basic bow side length: 200 mm
for cleaning
Basic bow width, front: 155 mm, rear: 225 mm
Material:
Metal components: Anodized aluminium, stainless steel
Lateral arms: Carbon fibre compound, NBR (nitrile rubber)
Do not use
any unsuitable
Adjustment options:
disinfectants
CE value range: +20° to -30°
BP angle range: +/- 15°
Correctly
assemble device
according to
the Operating
Instructions or
contact your
Service Centre
Delivery forms may vary from country to country.