Introduction/Signs And Symbols; Preface; Introduction; Notes Regarding The Operating Instructions - Ivoclar digital UTS CAD Mode D'emploi

1 Introduction/Signs and Symbols

1.1 Preface

Dear Customer,
Thank you for having purchased the UTS CAD. It is a highly-
technical quality instrument. This product is distinguished for
its good quality and high precision.
The UTS CAD has been designed according to the latest
industry standards. Inappropriate use may damage the
equipment and be harmful to personnel. Please observe the
relevant notes and read the Operating Instructions carefully.
Enjoy working with the UTS CAD.

1.2 Introduction

The signs and symbols in these Operating Instructions
facilitate the finding of important points and have the
following meanings:
Important information
Risks and dangers
Contraindication

1.3 Notes regarding the Operating Instructions

Furnace concerned: UTS CAD
Target group: Dentists, orthodontists, dental
technologists
These Operating Instructions facilitate the correct, safe and
economical use of the UTS CAD.
Should you lose the Operating Instructions, extra copies can
be ordered from the respective Service Centre or downloaded
as PDF from the internet.

2 Safety First

We recommend this chapter to all individuals working with
the device or perform cleaning and maintenance work.

2.1 Indications

When manipulating UTS CAD make sure not to injure the
eyes of the patient with the components, particularly with
the end of the bow.
Risks and dangers:

2.2 Health and safety instructions

UTS CAD must only be used for the purpose described in
Chapter 3. Further instructions to assure proper use of
UTS CAD:
The instructions, regulations, and notes in these
Operating Instructions must be observed.
UTS CAD must be properly maintained (see Chapter 7).
When manipulating
UTS CAD make sure not
to injure the eyes of the
patient with the basic
bow.
17