Ivoclar digital UTS CAD Mode D'emploi page 22

6.2.5 Reading off and documenting the angle values
Now, read the CE angle off the CE scale (9) and note the
angle value on the corresponding data sheet or the order
slip, respectively.
Now, also read the BP angle off the BP scale (6) and note
the angle value on the corresponding data sheet or the order
slip, respectively.
22
6.2.6 Loosening the bite fork fixation screw
Loosen the bite fork fixation screw (10) and pull the bite fork
(2) or centric tray off the bite fork adapter (13).
6.2.7 Cleaning the components
Measurement is completed and the components can be
cleaned and wipe disinfected. Please also observe
6
Chapter 7.