Gas Dryer Precautions; Installation Safety Precautions - Haier GDE480BW Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GAS DRYER PRECAUTIONS

For your safety, the information in this manual must be followed to
minimize the risk of re or explosion or to prevent property damage,
personal injury or loss of life.
IMPORTANT: The gas installation must conform with local codes, or in
absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/
NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1.
Installation must be performed by a quali ed or licensed contractor,
plumber, or gas tter quali ed or licensed by the state, province, or
region where this appliance is being installed.
Combustible materials, gasoline, and other ammable vapors and liquids
must not be stored near the dryer.

INSTALLATION SAFETY PRECAUTIONS

Before you throw away your old appliance, remove the door or lid so
that children cannot hide or get trapped inside your old appliance.
IMPORTANT: The dryer, when installed, must be electrically grounded in
accordance with local codes, or in the absence of local codes, with the
National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code,
CSA C22.1.
The dryer must be installed by a quali ed appliance technician.
Do not install or store this appliance where it will be exposed to water
and/or to the weather.
The appliance must be properly grounded to conform with all electrical
codes and ordinances. See "Electrical Requirements" section.
Do not install this dryer to an exhaust system with plastic or metal foil
exible ducting. Flexible ducting can collapse, easily be crushed, and trap
lint. These conditions will obstruct clothes dryer air ow and increase the
risk of re.
WARNING
DANGER
3

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gdg480bwCgde480bw

Table des Matières