Control Panel And Features; Start/Pause Button - Haier GDE480BW Manuel D'utilisation

CONTROL PANEL AND FEATURES

CONTROL PANEL
A
DRY TEMP BUTTON
•
Use to select a drying temperature for Timed Dry only. There are 4 available
drying temperatures to choose from: High, Medium, Low, and No Heat.
CYCLE SELECTION KNOB
•
Turn the dryer on by rotating the Cycle Selection Knob.
NOTE: If the dryer is not started, it will automatically turn o after 5 mins.
•
There are 3 Automatic Cycles and 4 selections for Timed Dry:
Heavy Duty - Use this cycle for heavy garments like jeans and towels.
Normal - Use this cycle for permanent press, synthetics, casual clothes.
Delicate - Use this cycle to dry small loads and delicate fabrics.
Timed Dry - 10, 30, 60 or 90 minute cycles.

START/PAUSE BUTTON

•
Press this button to start a selected cycle or to pause an operating cycle.
NOTE: After starting the dryer, you must pause an operating cycle to change
the Temp setting.
NOTE: Opening the dryer door will also pause an operating cycle.
NOTE: If the cycle status is Wrinkle Saver, pressing the pause button or
opening the dryer door will cancel the operating cycle and turn the power o .
DRY LEVEL BUTTON
•
Use to select a level of dryness for Auto Cycles only. There are 3 levels to
choose from: More, Normal, and Less.
B C
D E
21