Sound Controls; Equalizer; P.bass Control; Bass/Treble Control - Pioneer X-CM31-K Mode D'emploi

Masquer les pouces Voir aussi pour X-CM31-K:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
Getting started

Sound controls

Equalizer

When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT
JAZZ
ROCK
POP

P.bass control

When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the P.BASS on the remote
control.

Bass/treble control

Press the BASS/TREBLE, then press
or treble.
Note
EQUALIZER, P.BASS and BASS/TREBLE, the simultaneous
operation is not possible. Among the features of these three,
one feature will only work you have selected.
If you select one of three functions, features
that are not selected will be set as follows.
1
If you change the settings of P.BASS (ON/
OFF).
• EQUALIZER : FLAT
• BASS/TREBLE : BASS=0, TREBLE=0
2
If you change the settings of EQUALIZER.
• P.BASS : OFF
• BASS/TREBLE : BASS=0, TREBLE=0
3
If you change the settings of BASS/TREBLE.
• P.BASS : OFF
• EQUALIZER : FLAT
Equalizer off.
For jazz.
For rock.
For pop music.
to adjust the bass

Setting the wake-up timer

Used to change the existing timer setting, or to set a new
timer.
1
Press
STANDBY/ON to turn the power on.
2
Press and hold CLOCK/TIMER.
3
Press
to select "ONCE" or "DAILY",
then press ENTER.
ONCE – Once timer play works for one time only at a
preset time.
DAILY – Daily timer play works at the same preset time
and days of week.
4
Press
to select "TIMER SET", then
press ENTER.
5
Press
to select the timer playback
source, then press ENTER.
• CD, FM, AM, USB/IPOD, IPOD, AUDIO IN and LINE can
be selected as the playback source.
6
Press
to select the timer day, then
press ENTER.
7
Press
to set the hour, then press
ENTER.
8
Press
to set the minute, then press
ENTER.
• Set the time to finish as in steps 7 and 8 above.
9
Adjust the volume press VOLUME +/- , then
press ENTER.
10 Press
STANDBY/ON to enter the power
standby mode.
• The TIMER indicator lights up.
04
13
En

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

X-cm31-wX-cm31-tX-cm31-rX-cm31-jX-cm31-n

Table des Matières