Switching The Display; Completing Charging And Disconnecting The Charger; Charging Phases; 6 V: Slow Charging - AEG WM 6 Mode D'emploi

20 www.aeg-automotive.com

Switching the display

During the charging process you can repeatedly
press the „V / A / %" button (3) to display the
following parameters:
•
V = charging voltage
•
A = charging current
•
% = battery charge condition
Completing charging and disconnecting the
charger
1. First, remove the plug from the 230V power
socket.
2. Disconnect the black (-) terminal connection
cable (5) from the negative battery terminal.
3. Disconnect the red (+) terminal connection cable
(6) from the positive battery terminal.

ChARGING PhASES

6 V: slow charging

Model Charging voltage (V)
WM 6
6 V
WM 10 6 V
12 V: slow charging
Model Charging voltage (V)
WM 6
12 V
WM 10
12 V

12 V: quick charging

Model Charging voltage (V)
WM 6 12 V
WM 10 12 V
SAFETy
FUnCtIOnS
the charger features the following safety features
to prevent damage to the charger and the battery
or the vehicle:
•
Short circuit (defective battery),
•
incorrect connection (connected with reversed
polarity),
•
sparking
•
overheating
•
excess current
•
overcharging
Charging current (A)
2 A
2 A
Charging current (A)
2 A
2 A
Charging current (A)
6 A
10 A