Nolan N40 Full Sécurité Et Instructions D'utilisation page 25

without any dispersion. The front air intake (Fig. 25) can be completely or partially
opened depending on whether its slider is pulled completely backwards (A). To close
the front air intake, pull the above mentioned slider completely forward (B).
Chin Guard Air Intake:
how to open and close it.
Rear Extractors:
out ensuring an optimum comfort inside the helmet (Fig. 27).
N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
Your Nolan helmet is factory-preset to be equipped with the N-Com communication
system During the communication system installation (see the specific instructions
contained in the N-Com kit), it will be necessary to remove the foam material fillers
located in the polystyrene cheek pads next to the N-Com earphones seats.
WARNING
- The above-mentioned fillers should only be removed if the helmet is used with
an N-Com compatible system installed.
allows ventilation in the mouth and visor area. See Fig. 26 for
are integrated in a rear spoiler and allow warm and stale air to flow
25